Кабель с изоляцией NC030

Insulated NC030 Cable

Cable NC030 con Aislamiento

BOSCH STARTER Made from Insulated NC030 Cable

Chemical Content, %

NiMnFeSiCuOtherROHS Directive
CdPbHgCr
230.5BalNDNDNDND

Low Resistance Heating Alloy—NC030 is widely used in low-voltage circuit breaker, thermal overload relay, and other low-voltage electrical product. It is one of the key materials of the low-voltage electrical products.

Certificate: ISO 9001

Size: Customized

color: Brown

Density:8.9(g/cm3)

Sample:Small Order Accepted

surface:Bright

product name :CuNi23

treatment :polishing

size:as request

Mechanical Properties

Max Continuous Service Temp250ºC
Resisivity at 20ºC0.35%ohm mm2/m
Density8.9 g/cm3
Thermal Conductivity16(Max)
Melting Point115ºC
Tensile Strength,N/mm2   Annealed,Soft270~420 Mpa
Tensile Strength,N/mm2   Cold Rolled350~840 Mpa
Elongation(anneal)25% (Max)
Elongation(cold rolled)2% (Max)
EMF vs Cu, μV/ºC (0~100ºC)-25
Micrographic Structureaustenite
Magnetic PropertyNon

CuNi23Mn Tradenames:
Alloy 180, CuNi 180, 180 Alloy, MWS-180, Cuprothal 180, Midohm, HAI-180, Cu-Ni 23, Alloy 380, Nickel alloy 180
 
Resistance Alloy 180 – CuNi23Mn Sizes / Temper Capabilities
Condition: Bright, Annealed, Soft 
Wire diameter 0.02mm-1.0mm packing in spool, big than 1.0mm packing in coil
Rod, Bar diameter 1mm-30mm 
Strip: Thickness 0.01mm-7mm, Width 1mm-280mm 
Enameled condition is available

Application:

BOSCH Starter

Feedback from clients:

Package:

Contact Methods:

E-mail: [email protected]
WeChat: 0086-183-2103-3908

Comment

Your email address will not be published. Required fields are marked *